|
High-speed spinning set
We have put together a kit to adapt a regular wheel – S10, S10 DT, S51, S51DT, S75, S15, S17 – to be better suited to spin finer yarns. The high speed spinning set comes with a high-speed flyer, 3 fatcore bobbins and a drive belt. The cost is less than buying each of these components separately.
-
 Victoria or Julia High Speed Set - This high speed set for the Victoria contains a flyer, 3 bobbins, a small whorl (you have to add this to the existing whorl) and a hook for threading the yarn through the orifice and the flyer hole. The image is of the beech set, but in the oak set the flyer disc and the hook handle are oak. The orifice is 5 mm, but you can take out the inserts and have an 8 or 12 mm orifice. Ratio's are 1:20 for the Victoria and 1:30 for the Julia.
|
Narrow Flyer – comes standard with all wheels Narrow flyers are 4” wide inside. Wheel models S15, S17 and S75 will come with flyers that have stationary hooks. All other wheels will come with flyers that have sliding hooks; same as the High Speed Flyer.
Wide Flyer – shown to the left, this flyer is required to operate the bulky bobbin. It is 5” wide inside. This flyer is required if you are using bulky bobbins.
High-Speed Flyer - The high speed flyer comes with a sliding hook to allow for fine adjustments of hook position. It is 4" wide inside and has a 3/8" orifice.